The Amazone rollers are available in different versions which can be used for different areas of work and surface depths. The Amazone back-up rollers SW series is optimal for effective depth guidance and simultaneous ground preparation. The supporting rollers create a loose, opened seed bed in which the seeds can then be placed. The supporting rollers can also prepare the ground in order to allow work with a planter. The version with an external diameter of 420 mm is available with a working width of 2.5 m and 3 m. supporting rollers with an external diameter of 520 mm are available with a working width of 3 m and 4 m. The toothpick roller PW can provide a solidification of the surface coverage. These rollers are available with an external diameter of 420 mm and with either a working width of 2.5 m or 3 m. Another variation is also available with an external diameter of 500 mm and 600 mm with a working depth of 3 m or 4 m. At the same time the wear-resistant, deep-set deflectors make sure that you can work without any blockage or obstruction at any time, even on very wet ground and on a large amount of straw. Due to the carbide metal surfacing this series of Amazone rollers guarantee a life expectancy which is three times that of normal deflectors. The Amazone roller offer is completed with the addition of the tapered-ring roller for high pressure compression stripes for seed depositing. Much like the deflectors, the tapered-ring roller also works thoroughly on wet ground and proves to work entirely efficiently. Last but not least, Catros and Cenius are household names when talking about cutting-ring rollers. These Amazon rollers are particularly efficient when it comes to heavy ground, yet also very good for light sites. They are therefore, applicable in many places.